SS102 Optimus Prime Add Ons
        Get rid of those ugly huge smokestacks!
Enhance Your Studio Series Optimus PrimeÂ
Enhance the authenticity of your Studio Series Rise of the Beast SS102 Optimus Prime with these custom-made add-ons.Â
 Each set includes:
A pair of meticulously crafted, perfectly scaled smokestacks with rotatable exhaust pipes for a more accurate transformation.Â
A slot-in torso gap filler
An Ion Blaster extension that works with the original blaster.
2x Tiny Autobot emblems designed specifically for the chest.Â
Elevate your Optimus Prime figure to new heights with these must-have accessories.Â
BEFORE
AFTER
Product may look different due to custom painting
Smokestacks
Gap Filler
Autobot Emblem
Blaster Extender
Instructions
Installing the smokestacks
- Unscrew and remove shoulder panel
Do the same for the other side.
2. Remove original smokestacks
Please keep the original smokestacks for backup.
3. Insert new smokestack
Pay attention to the insertion angle to avoid breakage.
4. Rotate and align the smokestack to the panel
Rotate slowly to avoid breakage.
5. Replace the shoulder panel and the screws.
Ensure to screw it nice and tight.
6. All done!
Rotate the exhaust pipes slowly during transformations.
Installing tummy gap filler
- Slot in the gap filler
Pay attention to the direction
2. Say bye bye to the funny tummy face
Installing Autobot logo
1. Carefully detach the logo using pliers or a hobby knife
Do it very very carefully as the item is extremely small. A spare logo is given in case you yeet it.
2. Place a dot of glue using a toothpick
Use PVA or white glue. DO NOT use super glue as you won't have enough time to adjust the positioning.
3. Place the logo using a toothpick or a tweezer
Handle with care as it is still possible for you to lose it.
4. Wait for it to completely dry before handling / transformations
Give it a good nudge to see if it has stick firmly. If it detaches, you might need a stronger glue.
Installing Ion Blaster Extender
1. Attach the extender to the blaster
Or straight to the arm
2. Attach the extended blaster to the arm
PEW PEW
TIPS : A slight wash with black or dark gray will help to match the colour with the original parts.
ATTENTION : Though the parts are printed using high strength resin, it is not as strong as injection molded plastics.
Please handle with care.